资源简介

21 -- This is the distance from the end of the path to the end of the graphic.
58 -- This is the width of the graphics.["Ball", "Oval", "Rectangle", "Round", "Square"]21 -- This is the distance from the end of the path to the end of the graphic.
46 -- This is the width of the graphics.21 -- This is the distance from the end of the path to the end of the graphic.
58 -- This is the width of the graphics.21 -- This is the distance from the end of the path to the end of the graphic.
46 -- This is the width of the graphics.25 -- This is the distance from the end of the path to the end of the graphic.
52 -- This is the width of the graphics.["Ball", "Oval", "Rectangle", "Round", "Square"]["Ball", "Oval", "Rectangle", "Round", "Square"]["Vertical Bar", "Horizontal Bar"]["Ball", "Oval", "Rectangle", "Round", "Square"]18 -- This is the distance from the end of the path to the end of the graphic.
49 -- This is the width of the graphics.DirectMediaXtra.x32
=====================
注册号：DMX0000000["Ball", "Oval", "Rectangle", "Round", "Square"]21 -- This is the distance from the end of the path to the end of the graphic.
49 -- This is the width of the graphics.18 -- This is the distance from the end of the path to the end of the graphic.
58 -- This is the width of the graphics.21 -- This is the distance from the end of the path to the end of the graphic.
46 -- This is the width of the graphics.["Ball", "Oval", "Rectangle", "Round", "Square"]=====================
注册号：DMX000000026 -- This is the distance from the end of the path to the end of the graphic.
52 -- This is the width of the graphics.["Ball", "Oval", "Rectangle", "Round", "Square"]["Ball", "Oval", "Rectangle", "Round", "Square"]["Ball", "Oval", "Rectangle", "Round", "Square"]8 -- This is the distance from the end of the path to the end of the graphic.
32 -- This is the width of the graphics.["Ball", "Oval", "Rectangle", "Round", "Square"]18 -- This is the distance from the end of the path to the end of the graphic.
49 -- This is the width of the graphics.["Ball", "Oval", "Rectangle", "Round", "Square"]["Ball", "Oval", "Rectangle", "Round", "Square"]["Vertical Bar", "Horizontal Bar"]["Ball", "Oval", "Rectangle", "Round", "Square"]["Ball", "Oval", "Rectangle", "Round", "Square"]["Vertical Bar", "Horizontal Bar"]木琴：由长短不一的硬木条顺次排列组成，用两根小木槌敲打发音。其音色
强奏时清脆、嘹亮，弱奏时柔和甜蜜、玲珑可爱。
三角铁：由一根弯成三角形的钢条而成。用小金属敲击发音，音色清脆、透明响亮。
钹：由一对金属圆盘组成。常称较大的为钹。较小的为钗。能发出强烈的爆裂声，也能发出轻轻的萧萧声。
小堂鼓：以木为框，两端蒙牛皮，用两根木槌敲击，形制大小不一。常用于秧歌、民间吹打乐、戏曲音乐之中。
大鼓：鼓框用木或金属制成，两端扁平，蒙以羊皮，形如大桶。用一支或两支具有沉重而柔软的槌头敲击，发音低沉响亮，雄壮有力。弱奏与滚奏的效果特别好，强奏可用于表示炮击、雷鸣、战争、狂热等气氛；轻奏时能表示神秘、庄严等情绪。
铃鼓：在扁平的木制小圆形鼓框的一端蒙以羊皮，框架上嵌以若干金属小钹。演奏时，左手持鼓，悬空摇动，有时右手指或掌根击之。发音清脆、明亮，还可发出急速和美妙的震音，也能够奏出最复杂的节奏花样。
定音鼓：锅形，鼓面蒙以羊皮或小牛皮，用杠杆与踏板装置调节音高，两根鼓槌由海绵及小木棒组成，音色浑厚，它可以按乐曲的需要调定音高。
锣：铜制打击乐器。锣身圆形弧面，锣槌为木槌。音响低沉、宏亮而强烈，余音悠长持久。
木鱼：木制，中空。用小木槌击奏发音。发音清脆、响亮，节奏感强。原为佛教法器，后来逐渐用于民间器乐合奏。
钢琴：由木制琴廓、钢板、钢丝、击弦机件、键盘以及踏板等组成 ，有88个黑白键和3个踏板。钢琴的音域宽、音量大，音色变化丰富，可演奏多声部结构的音乐作品，演奏技巧比较复杂，主要有独奏、伴奏，也可以合奏、重奏，或用于管弦乐队。
铝板琴：由长短不一的钢片或铝板组成。用两根金属或木槌直接敲击钢片过铝板而发音。音色尖锐、清脆如银铃。乐队中偶然使用，属色彩性乐器。not found No description.
1 corporate.gif The corporate look. This is optimized for 640 x 480 display.
2 consumer.gif The consumer look. This is optimized for 640 x 480 display.
3 educational.gif The educational look. This is optimized for 640 x 480 display.
4 simple.gif A clean, simple look. This is optimized for 640 x 480 display.
5 techno-1.gif Black and gray, simple look. This is optimized for 640 x 480 display.["Ball", "Oval", "Rectangle", "Round", "Square"]["Ball", "Oval", "Rectangle", "Round", "Square"]["Ball", "Oval", "Rectangle", "Round", "Square"]["Ball", "Oval", "Rectangle", "Round", "Square"]21 -- This is the distance from the end of the path to the end of the graphic.
49 -- This is the width of the graphics.21 -- This is the distance from the end of the path to the end of the graphic.
49 -- This is the width of the graphics.8 -- This is the distance from the end of the path to the end of the graphic.
32 -- This is the width of the graphics.25 -- This is the distance from the end of the path to the end of the graphic.
52 -- This is the width of the graphics.["Ball", "Oval", "Rectangle", "Round", "Square"]21 -- This is the distance from the end of the path to the end of the graphic.
49 -- This is the width of the graphics.["Ball", "Oval", "Rectangle", "Round", "Square"]["Ball", "Oval", "Rectangle", "Round", "Square"]25 -- This is the distance from the end of the path to the end of the graphic.
52 -- This is the width of the graphics.25 -- This is the distance from the end of the path to the end of the graphic.
52 -- This is the width of the graphics.21 -- This is the distance from the end of the path to the end of the graphic.
46 -- This is the width of the graphics.21 -- This is the distance from the end of the path to the end of the graphic.
46 -- This is the width of the graphics.8 -- This is the distance from the end of the path to the end of the graphic.
32 -- This is the width of the graphics.4 -- This is the distance from the end of the path to the end of the graphic.
32 -- This is the width of the graphics.["Double Bar"]["Round"]21 -- This is the distance from the end of the path to the end of the graphic.
46 -- This is the width of the graphics.["Ball", "Oval", "Rectangle", "Round", "Square"]21 -- This is the distance from the end of the path to the end of the graphic.
46 -- This is the width of the graphics.["Ball", "Oval", "Rectangle", "Round", "Square"]8 -- This is the distance from the end of the path to the end of the graphic.
32 -- This is the width of the graphics.25 -- This is the distance from the end of the path to the end of the graphic.
52 -- This is the width of the graphics.22 -- This is the distance from the end of the path to the end of the graphic.
49 -- This is the width of the graphics.18 -- This is the distance from the end of the path to the end of the graphic.
58 -- This is the width of the graphics.["Ball", "Oval", "Rectangle", "Round", "Square"]["Ball", "Oval", "Rectangle", "Round", "Square"]18 -- This is the distance from the end of the path to the end of the graphic.
58 -- This is the width of the graphics.ACTIVEX XTRA 1.0
==================
Copyright 1997 Macromedia, Inc. All rights reserved. The
information in this file may not be copied, photocopied,
reproduced, translated, or converted to any printed, electronic
or machine-readable form in whole or in part without prior
written approval of Macromedia, Inc.
Macromedia, Inc.
600 Townsend St.
San Francisco, CA 94103
==================
IMPORTANT NOTE:
When using the ActiveXControlQuery() function you should note that
it checks for the existence of a particular ClassID. If that ID
is found, the function will return an affirmative response regardless
of the version of the installed control. This leaves open the
possibility that an older version of a control can coincidentally be
found on the target machine and produce unpredictable results. For
this reason you should always force an install of your intended
controls unless you are certain that all machines on which your piece
will run would never have older versions of your controls already
installed.25 -- This is the distance from the end of the path to the end of the graphic.
52 -- This is the width of the graphics.["Ball", "Oval", "Rectangle", "Round", "Square"]FileIO Xtra
Version 1.0.4 - 09dec97 CH
FileIO Xtra for Macromedia Director 6.0
=======================================
FileIO provides a set of methods allowing users of Macromedia Director 6.0 to
programmatically access files using the Lingo scripting language. The FileIO
Xtra is a scripting Xtra. The scripting Xtra interface is portable across
all Macromedia products. Hence the FileIO Xtra may be used with Authorware 4.
Using FileIO
============
If automatic opening is desired, place a copy of the FileIO Xtra for your platform
into Application Xtra's folder. If automatic opening is not desired, the Xtra can be
placed anywhere and opened using Lingo's 'openXLib' command. This applies to
projector's as well, the Xtra must be placed in an Xtra's folder in the same folder
as the projector.
Each instance of FileIO can reference a single open file. If multiple files are to
be opened simultaneously, a new instance of FileIO is required for each opened file.
A single instance can be used to open multiple files, as long as the file is closed
before a new file is opened. To create a new instance, use the new() method, defined
below. To dispose of an instance, set the instance variable to 0. All methods that
read from or write to the file must be called after the file has been opened using
the openFile() method. If a new file is to be opened using the same instance, the
file must be closed using closeFile(). Files can be opened in three different modes:
Read, Write and Read/Write. When writing to a file, the contents of the file after
the current position are overwritten.
Example Lingo
set myFile = new(xtra "fileio") -- Create an instance of FileIO
set fileName = displayOpen(myFile) -- Display Open Dialog and return the fileName
openFile(myFile, fileName, 1) -- Open the file
set theFile = readFile(myFile) -- Read the file and return a string to Lingo
closeFile(myFile) -- Close the file
set myFile = 0 -- Dispose of the instance
In this example, we created a new instance and stored it in the variable myFile.
Next, the displayOpen() method is used to display an open dialog to allow a file to
be chosen. The file is returned as a fully-qualified path string to Lingo. The file
is then opened in read only mode, the contents of the file are read, and the file is
closed. Lastly, the instance is disposed of.
Known Problems
==============
The createFile() method does not support relative filenames, or the Lingo '@'
operator in pathnames. This will be fixed in a later version.
The displaySave() method does not directly inform Lingo whether a user is
replacing an existing file. The workaround is to attempt to create the file using
createFile() and check the error code for a "File Already Exists" error.
History
=======
09dec97 (v1.0.4)
Fixed a problem leading to garbage characters appearing at the ends of lines,
or possibly crash.
18apr97 (v1.0.2)
Fixed parenting problem with displaySave() and displayOpen() methods.
Added support for Authorware.
27may96 (v1.0.1)
Added support for double-byte character sets.
Added version() method to report FileIO Xtra version information.
Added getOSDir() to return a full path to the Windows Directory/System Folder.
15mar96 (v1.0.0 Beta)
First public release.
Method Reference
================
The first line of each definition contains the method name, a list of parameters and
thier value types. The internal name of the FileIO Xtra is "fileio". This name is
used whenever referencing the xtra using the form 'xtra "fileio"'.
Note that while Director and projector's can use net-based files by supplying a URL
for a filename, the FileIO Xtra cannot. It is limited to accessesing files available
via filesystems mounted on the local system.
New methods will appear at the bottom of this list.
---
mMessageList( xtra reference )
Returns a list of methods and parameters, as well as a brief explanation of each.
---
new( xtra reference )
This is called to create a new instance of FileIO. The Xtra can be referenced by name
or number. It returns an instance variable used to reference the instance.
---
fileName( instance )
Returns the fileName string of the current open file. The file must be open use this
method.
---
status( instance )
Returns the error code returned by the last method called. The value is returned as
an integer.
---
error( instance, int error )
Returns a readable error string. A numeric error code is passed in as the
second argument. The errors returned can be any of the following:
"OK"
"Memory allocation failure"
"File directory full"
"Volume full"
"Volume not found"
"I/O Error"
"Bad file name"
"File not open"
"Too many files open"
"File not found"
"No such drive"
"No disk in drive"
"Directory not found"
"Instance has an open file"
"File already exists"
"File is opened read-only"
"File is opened write-only"
"Unknown error"
---
setFilterMask( instance, string mask )
Sets the filter mask used by calls to displayOpen() and displaySave(). The filter
mask determines what files to show when displaying an Open or Save dialog. The second
parameter is a string representing the filter mask to set. On Windows, this is a
comma seperated string of file types and associated extensions (e.g. "All
Files,*.*,Text Files,*.TXT"), and a string of types on the Macintosh (e.g.
"TEXTPICT"). On Windows, the filter mask string is limited to 256 characters. On the
Macintosh, you are limited to four four-character types. When a new instance of
FileIO is created, the filter masks defaults to all files. To reset the filter mask to
display all files after it has been set, just pass in an empty string (e.g.
setFilterMask(me, "")).
---
openFile( instance, string fileName, int openMode )
Opens the named file. This call must be used before any read/write operations can
take place. The filename can be either a fully-qualified path and filename, or a
relative filename. The Lingo '@' pathname operator is supported. The openMode
parameter specifies whether to open the file in Read, Write or ReadWrite mode. Valid
Flags are: 0 Read/Write, 1 Read, 2 Write.
---
closeFile( instance )
Closes a file that has been previously opened using the openFile() method.
---
displayOpen( instance )
Displays a platform specific Open dialog allowing a user to specify a file. Returns a
fully-qualified path and fileName to Lingo. The setFilterMask() method can be used to
control what file types are displayed in the dialog.
---
displaySave( instance, string title, string defaultFileName )
Displays a platform specific Save dialog allowing a user to specify a file. Returns a
fully-qualified path and fileName to Lingo. The setFilterMask() method can be used to
control what file types are displayed in the dialog. The string and defaultFileName
parameters allow you to specifiy a default filename to be displayed, as well as title
text for the save dialog.
---
createFile( instance, string fileName )
Creates a file. The fileName must be either a fileName to be created in the current
directory, or a fully-qualified path and fileName. The Lingo '@' pathname operator
and relative paths are not supported. After creating the new file, the file must be
opened before it can be written to.
---
setPosition( instance, position )
Sets the file position of the current open file. The file must be open to use this
method.
---
getPosition( instance )
Gets the file position of the current open file. Returned as an integer. The file
must be open to use this method.
---
getLength( instance )
Gets the length of the currently opened file. Returned as an integer. The file must
be open use this method. The value returned is the length of the file in bytes.
---
writeChar( instance, string theChar )
Writes a single character to the file at the current position. The file must be open
in write or read/write mode to use this method.
---
writeString( instance, string theString )
Writes a string to the file at the current position. The file must be open in write
or read/write mode to use this method.
---
readChar( instance )
Reads the character (either single or double-byte) at the current position and then
increments the position. The character is returned to Lingo as a string. The file must
be open in read or read/write mode to use this method.
---
readLine( instance )
Reads from the current position up to and including the next CR, increments the
position, and returns the string to Lingo. The file must be open in read or
read/write mode to use this method.
---
readFile( instance )
Reads from the current position to the end of the file and returns the file to Lingo
as a string. The file must be open in read or read/write mode to use this method.
---
readWord( instance )
Reads the next word starting at the current position. The file must be open in read
or read/write mode to use this method.
---
readToken( instance, string skipChar, string breakChar )
Reads the next 'token' starting at the current position. Characters matching the
skipChar parameter are "skipped" and the file is read until breakChar is encountered.
The file must be open in read or read/write mode to use this method. This method will
read double-byte tokens as long as the skip and break are single-byte characters. It
will not detect double-byte skip or break characters.
---
getFinderInfo( instance )
Returns the Type and Creator of the current file as a string. This method does
nothing when used under Windows. The file must be open to use this method.
---
setFinderInfo( instance, string typeAndCreator )
Sets the Type and Creator of the current file. The string takes the form of a space
seperated set of TYPE and CREATOR codes (e.g. "TEXT TTXT"). This method does nothing
when used under Windows. The file must be open to use this method.
---
delete( instance )
Deletes the currently opened file. The file must be open use this method.
---
version( xtraRef )
Returns FileIO version and build information. Useful when filing
bug reports, determining installed version while authoring, etc. No practical use beyond this.
---
getOSDir( )
Global method that returns the full path to either the Windows directory, or the System Folder
depending on which OS is currently being used. Does not require a child instance or
Xtra reference to call.
---18 -- This is the distance from the end of the path to the end of the graphic.
58 -- This is the width of the graphics.["Ball", "Oval", "Rectangle", "Round", "Square"]

展开更多......

收起↑